Powered by MRS Technology
Unprecedented combination of speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection.
Dramatically Speeds Up Quality Assurance of In-Process Inspection and/or Incoming/Outgoing parts inspection; Lowers Cost of Quality & Speeds Up Product Time-to-Market.
High-Precision accuracy with Multiple Reflection Suppression (MRS) Sensor Technology
Easy-to-use Software with Push-Button Automation
Automated 3D Volumetric Part Scan and Inspection Report in less than 3 minutes
Designed for use in general purpose metrology, the CyberGage®360 has a range of applications from medical to automotive to aerospace to consumer electronics, where high accuracy and high speed throughput are important.
8” x 4” (Cylinder 200mm diameter x 100 mm high)
MRS Sensor technology with 2 scanners (1 above and 1 below)
System Volumetric Accuracy
7 µm; 0.007mm +L/10000mm (ISO 10360)
5 µm; 0.005mm/0.00020
16 million points/part/pose. Typical cycle time <3 minutes
*Specifications may change without notice.
1 Accuracy is the Maximum Permissible error of the measured length between 6 sets of sphere features, repeated 10 times. These distances vary in length from approximately 30mm to 150mm. Measurements are made utilizing CyberGage®360’s standard operating procedure, and include all potential hardware and software error sources.
2 Repeatability is the allowable 3 Sigma error of the measured diameter of a ring gage, repeated 10 times. Measurements are made utilizing CyberGage®360’s standard operating procedure, and include all potential hardware and software error sources.