Maximum Flexibility for Increased Throughput

SQ3000-DD™ & SQ3000-D™

Make an Inquiry
SQ3000-D, Dual Lane – Single Sensor system is also available.
Make an Inquiry

Provides Flexibility to further increase productivity with high volume throughput, while relying on the unprecedented combination of speed, accuracy and ease-of-use of the SQ3000 3D AOI.

Metrology Grade Accuracy at Production Speed

Attain highly accurate data with the industry-leading Multi-Reflection Suppression® (MRS®) sensor technology that meticulously identifies and rejects reflections caused by shiny components and reflective solder joints. Effective suppression of multiple reflections is critical for highly accurate measurement, making MRS an ideal technology for a wide range of applications including those with very high quality requirements.

Choose between two of the same of two different MRS sensors.

Flexibility at Its Best

Inspect high volume assemblies, different assemblies and different board sizes simultaneously on different lanes, or even switch from dual lane to single lane mode to inspect very large boards.

Inspect different programs on different lanes as well as perform synchronous or asynchronous inspection.

Fast, Smart, Easy-to-use software

Reduce training efforts and minimize operator interaction with the AOI software’s intuitive interface, multi-touch controls and 3D image visualization tools take ease of use to a whole new level.

Speed programming with AI2 (Autonomous Image Interpretation) to keep it simple – no parameters to adjust or algorithms to tune.

Improve yields with full-fledged machine-level to factory-level SPC capability with powerful historical analysis and reporting tools included in CyberReport™. Improve traceability for process verification and yield improvement.

Flexibility at Its Best for Increased Throughput

With a smaller footprint than 2 SQ3000 standard systems, the dual lane, dual sensor SQ3000-DD features a smart conveyor design solution providing maximum flexibility to cater to varying PCB widths. This unique design gives you the convenience of inspecting different board sizes on different lanes or even switching from dual lane to single lane mode to inspect very large boards. With SQ3000-DD, you can also quickly inspect different programs on different lanes as well as perform synchronous or asynchronous inspection.

36+

Award-Winning MRS Technology

Ultimate

High Accuracy, Resolution and Speed

Intuitive

Easy-to-Use Software

Inspection Speed

Standard MRS Sensor: 40 cm²/sec (2D+3D)

High-Speed MRS Sensor: 50 cm²/sec (2D+3D)

High-Resolution MRS Sensor: 20 cm²/sec (2D+3D)

Ultra-High Resolution MRS Sensor: 15 cm²/sec (2D+3D)

PCB Size (Max.)

SQ3000 DD: Single Lane: 510 x 510 mm (20 x 20 in.); Dual Lane: 350 x 320 mm (13.7 x 12.5 in.)

SQ3000 D: Single Lane: 510 x 510 mm (20 x 20 in.); Dual Lane: 510 x 320 mm (20 x 12.5 in.)

Field of View (FOV)

Standard MRS Sensor: 36 x 30 mm

High-Speed MRS Sensor: 36 x 36 mm

High-Resolution MRS Sensor: 26 x 26 mm

Ultra-High Resolution MRS Sensor: 21 x 21 mm

Resolution

Standard MRS Sensor and High-Speed MRS Sensor: Sub 10µm

High-Resolution MRS Sensor and Ultra-High Resolution MRS Sensor: 7µm

Minimum Component Size

Standard MRS Sensor and High-Speed MRS Sensor:
0402 mm (01005 in.)

High-Resolution MRS Sensor and Ultra-High Resolution MRS Sensor:
0201 mm (008004 in.)

Component Height Clearance

Top: 50 mm ; Bottom: 30mm